We can fabricate almost anything using our state-of-the-art machinery and techniques.
3D milling of sculptural shapes and construction parts using Rotational Cutting and 2D Hot Wire Cutting as well as 3D Scanning
1lb. / 1 ½ lb./ 2 lb. EPS, Ren Shape, and other foams
4’ X 8’ X 3’ billets, milling up to 10” thick with unlimited ability for stacking of cut shapes
Dream it up and ShowCut can produce or enlarge it from CAD files or scanning of your maquette; from small parts to 40’ tall sculptures
The 2500 watt laser cuts 2D metals and other materials with extremely fine cutting and etching accuracy.
Steel, Aluminum, Stainless. Some Wood and Acrylic.
5’ X 10’ sheets up to ¾” think mild steel, ¼” thick aluminum, and ⅜” thick stainless.
One word – FAST. It cuts steel like Buttah!
(Butter for those not from Brooklyn)
Two hundred tons of pressure folds metal parts into simple and complex shapes using specialized punches and dies controlled by CNC.
Steel, Aluminum, Stainless, Polycarbonate.
¼” steel up to 12’ long, ⅜”aluminum up to 10’ long, ¼”stainless up to 10’ long, ½” steel up to 4’ long
Takes flat cut-out shapes and brings them to life in 3D form. Multi-faceted “boxes” and intricate trim details are now possible. Save time by folding your custom brackets instead of welding. Using ‘bump forming’, the CNC controller can closely approximate small and large radii cylinders. Check out the videos!
Pressurized to 50,000 psi, water mixed with garnet sand cuts non-porous materials with high tolerances.
Steel, Aluminum, Stainless, Concrete, Glass, Granite, Laminates, Gasket Material, and Titanium.
80” X 160” X 6” thick.
Special cutting head gives taper free cutting (true square edges) or bevel cutting up to 60 degrees off vertical. High accuracy with very thin kerf (cutting line) allows for inlays and machine shop tolerances with no heat affected zone.
Using a 4000 watt laser, the Fabrigear can cut, miter, bevel, notch, cope, drill, and tap tubes (round, square and rectangular), beams and channels into any geometry – simple or complex.
Steel, Aluminum, Stainless
25’ material length
Cutting envelope up to 6” square or 8” round on a ¾” thick mild steel, ¼ inch aluminum, and ⅜” thick stainless.
Watch the video to see what it can do! Any Metal structure, even the most complex of shapes that you can design, we can cut it! Measuring and marking, cutting to length, drilling, tapping, and welding prep can be done in one operation; a huge time saver when making parts with multiple operations.
A 15hp router on the computer controlled table performs 2D cutting of all shapes (X / Y) with 3rd Axis (Z) control for surface contours and 4th Axis (C0Aggregate Cutting.)
Wood, Plastics, Non-Ferrous Metals, Foam, Aluminum Composites (ACM’s)
Panels up to 6’ X 24’
Thickness up to 6”
With one of the largest beds available, ShowCut CNC Routing cuts your oversized panels when other fabricators can’t. Plus, ShowCut performs aggregate specialized cutting such as side milling, arch top molding; even knife cutting of fabrics, vinyl or carpet.